DEEP SEA DSE705 AUTO TRANSFER SWITCH CONTROL MODULE

The DSE705 is an Automatic Transfer Switch controller for genset and other applications. The module will monitor the voltage and frequency of the incoming AC mains (utility) supply and in the event of a failure, will issue a start command to the generator control system.

Once the generator is available and producing an output within limits, the DSE705 will control the transfer device and switch the load from the mains (utility) to the generating set.  Once the mains (utility) supply returns to within limits, the module will command a return to the mains (utility) supply and shut down the generator after a suitable cooling run. Various timing sequences are available to prevent nuisance starting on minor supply breaks.  The module can be easily configured via the front panel.

KEY FEATURES 

Automatic mains (utility) supply monitoring

Load changeover control

Manual start

Protected Solid State (PSS) outputs

Front panel mounting

Front panel programming

LED indicators

Configurable timers

Single/three phase mains (utility) sensing

Remote start input

Duration of Warranty

1. 12 months from the date of commissioning OR

2. 13 months from the date of delivery to the purchaser OR

3. 1000 operating hours

4. OR whichever come first